SynthHub
Written from devices/behringer/pro_800.json, updated 2026-10-27Edit on GitHubJSONCSVMIDNAMOSCQuery

Behringer Pro 800

4 free presets to load from the browser, and Behringer Pro 800 MIDI implementation: 102 CC, 1 SysEx commands, each named, for Claude (MCP), SuperCollider or any OSC app.

  • sourceElectra One preset
  • sounds4
Maker
Behringer
Firmware
per pencilresearch canonical CSV
Source
Electra One preset
Sounds
4

Sounds for it

4 sounds shared for it, each with its author's credit and licence: open one to listen and load it into your device from the browser.

SoundBy
Werckmeister From “pro800-103-Werckmeister” by samstaton.samstaton
Pythagorean From “pro800-102-Pythagorean” by samstaton.samstaton
Meantone From “pro800-101-Meantone” by samstaton.samstaton
12TET From “pro800-100-12TET” by samstaton.samstaton

Communities

Share and load its sounds

Plug the Behringer Pro 800 into your computer, open shared presets in Chrome, Edge or Opera and press Connect my synth: SynthHub finds it, takes the sound it plays and names it. Sounds others shared for it load from their page the same way.

https://app.electra.one/preset/d9foOCJ5Dy7p8ZLUvTXg

Adaptation by Magnus Støren Wedén

Repository

MIDI controls

104 controls, from the source at per pencilresearch canonical CSV
ControlCCRangeName to send
Banksel/pro_800/banksel
Mod wheel10–127/pro_800/mod_wheel
Breath20–127/pro_800/breath
Master tune30–127/pro_800/master_tune
Nrpn data msb60–127/pro_800/nrpn_data_msb
Mainvolume70–127/pro_800/mainvolume
Osca freq800–127/pro_800/osca_freq
Osca vol810–127/pro_800/osca_vol
Oscapw820–127/pro_800/oscapw
Oscb freq830–127/pro_800/oscb_freq
Oscb vol840–127/pro_800/oscb_vol
Oscbpw850–127/pro_800/oscbpw
Oscb fine860–127/pro_800/oscb_fine
Vcf freq870–127/pro_800/vcf_freq
Vcf reso880–127/pro_800/vcf_reso
Vcfen vamount890–127/pro_800/vcfen_vamount
Vcf rel900–127/pro_800/vcf_rel
Vcf sus910–127/pro_800/vcf_sus
Vcf dec920–127/pro_800/vcf_dec
Vcf atck930–127/pro_800/vcf_atck
Vca rel940–127/pro_800/vca_rel
Vca sus950–127/pro_800/vca_sus
Vca dec1000–127/pro_800/vca_dec
Vca atck1010–127/pro_800/vca_atck
Pmod filter envamount1020–127/pro_800/pmod_filter_envamount
Pmod osc bamount1030–127/pro_800/pmod_osc_bamount
Lfo freq1040–127/pro_800/lfo_freq
Lfo amount1050–127/pro_800/lfo_amount
Glide1060–127/pro_800/glide
Vca vel1070–127/pro_800/vca_vel
Vcf vel1080–127/pro_800/vcf_vel
Moddelay1090–127/pro_800/moddelay
Vib freq1100–127/pro_800/vib_freq
Vib amt1110–127/pro_800/vib_amt
Unison detune1120–127/pro_800/unison_detune
Noise1130–127/pro_800/noise
Nrpn data lsb380–127/pro_800/nrpn_data_lsb
Vca aftertouch1140–127/pro_800/vca_aftertouch
Vcf aftertouch1150–127/pro_800/vcf_aftertouch
Osca saw490–127/pro_800/osca_saw
Osca square500–127/pro_800/osca_square
Oscb saw510–127/pro_800/oscb_saw
Osbb tri520–127/pro_800/osbb_tri
Osbb square530–127/pro_800/osbb_square
Oscb sync540–127/pro_800/oscb_sync
Pmod freq a550–127/pro_800/pmod_freq_a
Pmod vcf560–127/pro_800/pmod_vcf
Lfo shape570–127/pro_800/lfo_shape
Lfo speed580–127/pro_800/lfo_speed
Lfo targets590–127/pro_800/lfo_targets
Vcf keyboard600–127/pro_800/vcf_keyboard
Vcfenv exp610–127/pro_800/vcfenv_exp
Vcfenv speed620–127/pro_800/vcfenv_speed
Vcaenv exp630–127/pro_800/vcaenv_exp
Sustainpedal640–127/pro_800/sustainpedal
Unison650–127/pro_800/unison
Bendertarget660–127/pro_800/bendertarget
Modwheel amount670–127/pro_800/modwheel_amount
Chromatic pitch a680–127/pro_800/chromatic_pitch_a
Chromatic pitch b690–127/pro_800/chromatic_pitch_b
Modwheel target700–127/pro_800/modwheel_target
Vibrato target710–127/pro_800/vibrato_target
Vcaenv speed720–127/pro_800/vcaenv_speed
Arp mode730–127/pro_800/arp_mode
Lfo dest freq740–127/pro_800/lfo_dest_freq
Lfo dest filter750–127/pro_800/lfo_dest_filter
Lfo dest pwm760–127/pro_800/lfo_dest_pwm
Nrpn dataincrement960–127/pro_800/nrpn_dataincrement
Nrpn datadecrement970–127/pro_800/nrpn_datadecrement
Nrpn param lsb980–127/pro_800/nrpn_param_lsb
Nrpn param msb990–127/pro_800/nrpn_param_msb
Lfo aftertouch1160–127/pro_800/lfo_aftertouch
Allsoundsoff1200–127/pro_800/allsoundsoff
Allnotesoff1230–127/pro_800/allnotesoff
Pmod flt amt1020–127/pro_800/pmod_flt_amt
Pmod osc b amt1030–127/pro_800/pmod_osc_b_amt
Mod delay1090–127/pro_800/mod_delay
Vcf env amount890–127/pro_800/vcf_env_amount
Lfo dest filt750–127/pro_800/lfo_dest_filt
Vca env1010–127/pro_800/vca_env
Vca env1000–127/pro_800/vca_env
Vca env950–127/pro_800/vca_env
Vca env940–127/pro_800/vca_env
Bank a b c d00–127/pro_800/bank_a_b_c_d
Vcf env930–127/pro_800/vcf_env
Vcf env920–127/pro_800/vcf_env
Vcf env910–127/pro_800/vcf_env
Vcf env900–127/pro_800/vcf_env
Osc a saw480–127/pro_800/osc_a_saw
Osc a saw490–127/pro_800/osc_a_saw
Osc a square500–127/pro_800/osc_a_square
Osc b saw510–127/pro_800/osc_b_saw
Osc b tri520–127/pro_800/osc_b_tri
Osc b square530–127/pro_800/osc_b_square
Osc b sync540–127/pro_800/osc_b_sync

Oscillators

ControlCCRangeName to send
Osc a freq800–127/pro_800/oscillators/osc_a_freq
Osc b freq830–127/pro_800/oscillators/osc_b_freq
Osc a vol810–127/pro_800/oscillators/osc_a_vol
Osc b vol840–127/pro_800/oscillators/osc_b_vol
Osc a pw820–127/pro_800/oscillators/osc_a_pw
Osc b pw850–127/pro_800/oscillators/osc_b_pw
Noise710–127/pro_800/oscillators/noise
Osc b fine860–127/pro_800/oscillators/osc_b_fine

SysEx commands

CommandArgumentsName to send
Vcf freqval: u7/pro_800/vcf_freq

Performance MIDI

Notes, pitch bend and any CC are also available: /pro_800/note/on <note> <velocity>, /pro_800/cc/<number> <value>, /pro_800/pitchbend <0-16383>, /pro_800/program_change <n>.

JSON

Use it

Find the MIDI ports, then start the bridge with this driver:

osc-bridge detect        # prints the ready-to-run line for what is plugged in
osc-bridge run --device behringer/pro_800 --out-port <N> --in-port <M>

Then send OSC to 127.0.0.1:7777, for example:

osc-bridge osc-send /pro_800/banksel 64

From Claude or any MCP client, the osc-bridge mcp server exposes this driver as pro_800: ask “what can the Behringer Pro 800 do?” and it reads this map with list_routes. See the MCP guide.

How it is recognised

  • The Behringer Pro 800 answers the maker's request F0 00 20 32 00 01 24 00 08 00 F7 with F0 00 20 32 00 01 24 00 09 ….
  • Written once for the maker's models, in the behringer profile.

osc-bridge detect sends these and picks this driver when they match.

Programs and banks

A program change selects a sound.

Reading a stored sound back: a request names the stored program.

4 banks of 100 programs (KnobKraft); bank select values not known. Program dump F0 00 20 32 00 01 24 00 77 <prog_lsb> <prog_msb> F7 answers 78.

Limitations

CC/NRPN only. SysEx (preset management, display control, bulk dump/load, vendor-proprietary opcodes) is NOT covered by pencilresearch. To extend this device with SysEx, sniff the vendor editor, add `sysex.header/footer` + `commands` blocks, and use `update_device.md` PR template.

Frequently asked questions

Where can I find free presets for the Behringer Pro 800?

SynthHub has 4 free sounds for the Behringer Pro 800, shared by 1 creator with their credit and licence. Open one and load it into the synth from the browser (Chrome, Edge, Opera or Firefox), with nothing to install.

How many parameters of the Behringer Pro 800 can be controlled over MIDI?

SynthHub's map of the Behringer Pro 800 lists 102 MIDI CC parameters, each with its number, range and a readable name; the full chart is on this page.

Can an AI agent like Claude control the Behringer Pro 800?

Yes: SynthHub's hosted MCP server knows the Behringer Pro 800's MIDI map, and its browser relay lets the agent send it parameter changes or load a sound, each sound change confirmed by you.