SynthHub
Written from devices/empress/zoia.vendor.fw-1.13.json, updated 2026-10-27Edit on GitHubJSONCSVMIDNAMOSCQuery

Empress ZOIA running ZOIA manual, firmware 1.13

The Empress ZOIA MIDI implementation: 1 CC, each named, for Claude (MCP), SuperCollider or any OSC app.

  • sourcemaker's documentation
  • firmware1.13
Maker
Empress
Firmware
ZOIA manual, firmware 1.13
Source
maker's documentation

Communities

MIDI controls

1 control, from the source at ZOIA manual, firmware 1.13

Bypass

Control CC Range Name to send
Bypass 60 discrete /zoia/bypass

Performance MIDI

Notes, pitch bend and any CC are also available: /zoia/note/on <note> <velocity>, /zoia/cc/<number> <value>, /zoia/pitchbend <0-16383>, /zoia/program_change <n>.

JSON

Use it

Find the MIDI ports, then start the bridge with this driver:

osc-bridge detect        # prints the ready-to-run line for what is plugged in
osc-bridge run --device empress/zoia.vendor.fw-1.13 --out-port <N> --in-port <M>

Then send OSC to 127.0.0.1:7777, for example:

osc-bridge osc-send /zoia/bypass 63

From Claude or any MCP client, the osc-bridge mcp server exposes this driver as zoia: ask “what can the Empress ZOIA do?” and it reads this map with list_routes. See the MCP guide.

Programs and banks

A program change selects a sound.

Bank Bank select (CC 0 / CC 32) Program change Numbers Shown as
Patches – / – 0–63 0–63 0-63

Recall one with /zoia/program/recall <bank> <number> (the bank by name, the number as shown).

On the configured channel. Banks of 3 patches exist on the footswitches only.

Limitations

Source: ZOIA manual, firmware 1.13. Fixed MIDI is only patch loading and bypass: a Program Change on the Config Menu's Midi Ch loads that patch (0-63; use /program_change) and CC#60 engages or bypasses. Everything else is built in each patch: MIDI modules can listen or send on any channel, and starred parameters take the CCs learned in the Starred List, on the Starred CC ch; reach them with /note/on, /note/off and /cc/{num}. MIDI Consume sets what passes through. No SysEx, no fixed clock map. MIDI comes in through the 1/8" Type A port or the Control Port tip (when set to MIDI). Untested on hardware.

Firmwares

The Empress ZOIA runs 2 firmwares SynthHub maps, each with its own MIDI or another's it shares. All the devices with several: firmwares.

Firmware From Licence MIDI Sounds
ZOIA firmware 5.41 empresseffects.com its own
ZOIA manual, firmware 1.13 empresseffects.com its own

Frequently asked questions

How many parameters of the Empress ZOIA can be controlled over MIDI?

SynthHub's map of the Empress ZOIA lists 1 MIDI CC parameters, each with its number, range and a readable name; the full chart is on this page.

Can an AI agent like Claude control the Empress ZOIA?

Yes: SynthHub's hosted MCP server knows the Empress ZOIA's MIDI map, and its browser relay lets the agent send it parameter changes or load a sound, each sound change confirmed by you.