devices/expressive-e/osmose.electra-richard-kram-ctrl-v2.fw-10.52.json, updated 2026-11-20Edit on GitHubJSONCSVMIDNAMOSCQueryExpressive E Osmose running per Electra preset
The Expressive E Osmose MIDI implementation: 22 CC, each named, for Claude (MCP), SuperCollider or any OSC app.
- sourceElectra One preset
- firmware10.52
- Maker
- Expressive E
- Firmware
- per Electra preset
- Source
- Electra One preset
Communities
Share and load its sounds
Plug the Expressive E Osmose into your computer, open shared presets in Chrome, Edge or Opera and press Connect my synth: SynthHub finds it, takes the sound it plays and names it. Sounds others shared for it load from their page the same way.
MIDI controls
22 controls, from the source at per Electra preset
| Control | CC | Range | Name to send |
|---|---|---|---|
| Macro i | 12 | 0–127 | /osmose/macro_i |
| Macro ii | 13 | 0–127 | /osmose/macro_ii |
| Macro iii | 14 | 0–127 | /osmose/macro_iii |
| Macro iv | 15 | 0–127 | /osmose/macro_iv |
| Macro v | 16 | 0–127 | /osmose/macro_v |
| Macro vi | 17 | 0–127 | /osmose/macro_vi |
| Mix | 93 | 0–127 | /osmose/mix |
| Min max | 26 | 0–127 | /osmose/min_max |
| Mix | 24 | 0–127 | /osmose/mix |
| Delay r4 | 23 | 0–127 | /osmose/delay_r4 |
| Feedback r3 | 22 | 0–127 | /osmose/feedback_r3 |
| Drive | 90 | 0–127 | /osmose/drive |
| Min max | 18 | 0–127 | /osmose/min_max |
| Pre delay r5 | 95 | 0–127 | /osmose/pre_delay_r5 |
| Hpf r6 | 96 | 0–127 | /osmose/hpf_r6 |
| Ratio | 92 | 0–127 | /osmose/ratio |
| Mix | 85 | 0–127 | /osmose/mix |
| Attack | 91 | 0–127 | /osmose/attack |
| Rate r2 | 21 | 0–127 | /osmose/rate_r2 |
| Frequency | 84 | 0–127 | /osmose/frequency |
| Depth r1 | 20 | 0–127 | /osmose/depth_r1 |
| Tilt | 83 | 0–127 | /osmose/tilt |
Performance MIDI
Notes, pitch bend and any CC are also available: /osmose/note/on <note> <velocity>, /osmose/cc/<number> <value>, /osmose/pitchbend <0-16383>, /osmose/program_change <n>.
Use it
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device expressive-e/osmose.electra-richard-kram-ctrl-v2.fw-10.52 --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
osc-bridge osc-send /osmose/macro_i 63
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as osmose: ask “what can the Expressive E Osmose do?” and it reads this map with list_routes. See the MCP guide.
How it is recognised
- Its USB MIDI port names hold “Osmose”.
- Written once for the maker's models, in the
expressive-e/osmoseprofile.
osc-bridge detect sends these and picks this driver when they match.
Programs and banks
A program change selects a setlist.
First switch on: on USB MIDI port 2 (sound engine), or the DIN input with din mode dsp in, dsp in/out or cvc.
| Bank | Bank select (CC 0 / CC 32) | Program change | Numbers | Shown as |
|---|---|---|---|---|
| Playlist 1 | 0 / – | 0–127 | 1–128 | 1-128 |
| Playlist 2 | 1 / – | 0–127 | 1–128 | 1-128 |
| Playlist 3 | 2 / – | 0–127 | 1–128 | 1-128 |
| Playlist 4 | 3 / – | 0–127 | 1–128 | 1-128 |
| Playlist 5 | 4 / – | 0–127 | 1–128 | 1-128 |
| Playlist 6 | 5 / – | 0–127 | 1–128 | 1-128 |
| Playlist 7 | 6 / – | 0–127 | 1–128 | 1-128 |
| Playlist 8 | 7 / – | 0–127 | 1–128 | 1-128 |
| Playlist 9 | 8 / – | 0–127 | 1–128 | 1-128 |
| Playlist 10 | 9 / – | 0–127 | 1–128 | 1-128 |
| Playlist 11 | 10 / – | 0–127 | 1–128 | 1-128 |
| Playlist 12 | 11 / – | 0–127 | 1–128 | 1-128 |
| Playlist 13 | 12 / – | 0–127 | 1–128 | 1-128 |
| Playlist 14 | 13 / – | 0–127 | 1–128 | 1-128 |
| Playlist 15 | 14 / – | 0–127 | 1–128 | 1-128 |
| Playlist 16 | 15 / – | 0–127 | 1–128 | 1-128 |
| Playlist 17 | 16 / – | 0–127 | 1–128 | 1-128 |
| Playlist 18 | 17 / – | 0–127 | 1–128 | 1-128 |
| Playlist 19 | 18 / – | 0–127 | 1–128 | 1-128 |
| Playlist 20 | 19 / – | 0–127 | 1–128 | 1-128 |
| Playlist 21 | 20 / – | 0–127 | 1–128 | 1-128 |
| Playlist 22 | 21 / – | 0–127 | 1–128 | 1-128 |
| Playlist 23 | 22 / – | 0–127 | 1–128 | 1-128 |
| Playlist 24 | 23 / – | 0–127 | 1–128 | 1-128 |
| Playlist 25 | 24 / – | 0–127 | 1–128 | 1-128 |
| Playlist 26 | 25 / – | 0–127 | 1–128 | 1-128 |
| Playlist 27 | 26 / – | 0–127 | 1–128 | 1-128 |
| Playlist 28 | 27 / – | 0–127 | 1–128 | 1-128 |
| Playlist 29 | 28 / – | 0–127 | 1–128 | 1-128 |
| Playlist 30 | 29 / – | 0–127 | 1–128 | 1-128 |
Recall one with /osmose/program/recall <bank> <number> (the bank by name, the number as shown).
Manual 2.3.1 (firmware 2.3.12+): CC 0 0-29 picks playlists 1-30, program change 0-127 their slots 1-128. Any preset shows in its info popup the CC 0 and program change that recall it (shown from 1). Five USB ports: play, sound engine, din interface, daw control, haken (macOS 'Osmose play'..., Windows 'Osmose', 'MIDIIN2 (Osmose)'...).
Written once for the maker's models, in the expressive-e/osmose profile.
Limitations
Imported from an Electra One community preset. The mapping reflects the preset author's editorial choices: parameter naming, ranges, and which params are exposed. Untested on hardware in this repo.
Other versions
The Expressive E Osmose is mapped in 2 versions. per pencilresearch canonical CSV.
Frequently asked questions
How many parameters of the Expressive E Osmose can be controlled over MIDI?
SynthHub's map of the Expressive E Osmose lists 22 MIDI CC parameters, each with its number, range and a readable name; the full chart is on this page.
Can an AI agent like Claude control the Expressive E Osmose?
Yes: SynthHub's hosted MCP server knows the Expressive E Osmose's MIDI map, and its browser relay lets the agent send it parameter changes or load a sound, each sound change confirmed by you.