devices/m-vave/fm-1.vendor.fw-sloopdx-4.0.json, updated 2026-10-24Edit on GitHubJSONCSVMIDNAMOSCQueryM-VAVE FM-1 running sloopDX 4.0
The M-VAVE FM-1 MIDI implementation: 16 CC, 3 SysEx commands, each named, for Claude (MCP), SuperCollider or any OSC app.
- sourcemaker's documentation
- firmwaresloopdx-4.0
- Maker
- M-VAVE
- Firmware
- sloopDX 4.0 (alternative firmware by zvenson)
- Source
- maker's documentation
From the README of zvenson/dxsloop at eeec0a6, licence GPL-3.0.
Custom firmware for the M-VAVE FM-1: FM drums you program on the device, and a DX7 on top (six operators, 32 algorithms, real voice editing).
Free and open source (GPL-3.0). A fork of SLOOP, which is based on Felucca. Not affiliated with either.
Install from the browser · Manual · Cheat Sheet (2 × A4) · Web editor · Releases · Report a bug
sloopDX 2.5 in a minute: FM with cutoff and resonance, the sounds, drums you program, 128 steps, OMNI.
sloopDX turns the FM-1 into what it says on the box: an FM synthesizer. There is one engine, a six-operator DX7 voice (Dexed's msfa core, ported to integer C and checked against Dexed (99 % of samples identical, the rest within 1-2 LSB)). The drum track plays FM drums made with the same engine. SLOOP's live workflow stays as it is: tracks, layers, sequencer, song mode and effects — and, from SLOOP 2.3, USB audio, a MIDI keyboard on the jack, MIDI clock, lights for playing in the dark and a full backup. The sample engines, sample sets and the other eight engines are gone.
New in 4.0: both processor cores, and SLOOP 2.6 / 2.7's MIDI. The sound is computed on both of the FM-1's cores (about twice the room for DX7 voices and effects), every track has its own MIDI channel, sustain pedal, pitch bend, MIDI LEARN, step entry from a keyboard, the punch-in effects and the buttons over MIDI, MIDI clock out; 15 arp modes and KBD HOLD; 27 punch-in effects; an INSERT effect on every track (From SLOOP 2.6 / 2.7). New in 3.5: a DAW picks the sounds. MIDI Program Change loads a preset into the track the channel plays, as the PRESETS knob does (MIDI). New in 2.2: patterns up to 128 steps. The four tracks share 256 steps: one track can run 128, the others take what is left; OCT− / OCT+ page through 8 pages. New in 2.1: a drum machine you can program. Every one of the 16 drum sounds has eight macros on the FM-1 (TUNE, DECAY, SWEEP, BRIGHT, NOISE, LEVEL, PAN, CHOKE, plus its own reverb send). A real noise operator gives snares, claps and hats their hiss. Steps can lock TUNE and DECAY per hit. MY KIT keeps your own kit in flash and travels as a .syx, and the dice rolls a whole new kit from a seed you can roll again.
Try it in your browser
Play a virtual FM-1 with any of its community firmwares: M-VAVE FM-1.
Communities
Where M-VAVE FM-1 owners meet, share and help each other:
- M-VAVE forum, forum
Share and load its sounds
Plug the M-VAVE FM-1 into your computer, open shared presets in Chrome, Edge or Opera and press Connect my synth: SynthHub finds it, takes the sound it plays and names it. Sounds others shared for it load from their page the same way.
https://github.com/zvenson/dxsloop
MIDI controls
19 controls, from the source at sloopDX 4.0 (alternative firmware by zvenson)
Track
| Control | CC | Range | Name to send |
|---|---|---|---|
| Bank select latched for pc | 0 | 0–127 | /fm1_sloopdx/bank_select_latched_for_pc |
| Glide | 5 | 0–127 | /fm1_sloopdx/glide |
| Level | 7 | 0–127 | /fm1_sloopdx/level |
| Pan | 10 | 0–127 | /fm1_sloopdx/pan |
| Expression | 11 | 0–127 | /fm1_sloopdx/expression |
| Sustain | 64 | switch | /fm1_sloopdx/sustain |
| Dx7 reso macro | 71 | 0–127 | /fm1_sloopdx/dx7_reso_macro |
| Dx7 rel macro 40 40 | 72 | 0–127 | /fm1_sloopdx/dx7_rel_macro_40_40 |
| Dx7 atk macro 40 40 | 73 | 0–127 | /fm1_sloopdx/dx7_atk_macro_40_40 |
| Dx7 cut macro | 74 | 0–127 | /fm1_sloopdx/dx7_cut_macro |
| Dx7 dec macro 40 40 | 75 | 0–127 | /fm1_sloopdx/dx7_dec_macro_40_40 |
| Reverb send | 91 | 0–127 | /fm1_sloopdx/reverb_send |
| Chorus send | 93 | 0–127 | /fm1_sloopdx/chorus_send |
| Delay send | 94 | 0–127 | /fm1_sloopdx/delay_send |
| Remote panel button 1 102 115 14 buttons | 102 | 0–127 | /fm1_sloopdx/remote_panel_button_1_102_115_14_buttons |
| Reset controllers | 121 | trigger | /fm1_sloopdx/reset_controllers |
SysEx commands
| Command | Arguments | Name to send |
|---|---|---|
| Program | program: u7 | /fm1_sloopdx/program |
| System info | /fm1_sloopdx/system/info | |
| System identify | /fm1_sloopdx/system/identify |
Performance MIDI
Notes, pitch bend and any CC are also available: /fm1_sloopdx/note/on <note> <velocity>, /fm1_sloopdx/cc/<number> <value>, /fm1_sloopdx/pitchbend <0-16383>, /fm1_sloopdx/program_change <n>.
Use it
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device m-vave/fm-1.vendor.fw-sloopdx-4.0 --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
osc-bridge osc-send /fm1_sloopdx/bank_select_latched_for_pc 63
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as fm1_sloopdx: ask “what can the M-VAVE FM-1 do?” and it reads this map with list_routes. See the MCP guide.
Limitations
sloopDX 4.0 by zvenson (GPL-3.0), a groovebox firmware for the FM-1. Keeps SLOOP's MIDI map except: CC74/71/73/75/72 drive DX7 macros CUT/RESO/ATK/DEC/REL (macros -40.+40); DX7 bank storage 8x32 via editor cmds 37-41/46. Channels: as SLOOP. Pitch bend: as SLOOP. Aftertouch: as SLOOP. Clock: as SLOOP. MIDI out: as SLOOP. NRPN: none. SysEx `F0 7D 46 4C`: SLOOP editor + BANK cmds 37 BEGIN, 38 WRITE (offset, <=512 7-bit bytes), 39 END (checksum), 40 INFO, 41 ERASE, 46 SELECT 0-7; INFO 'sloopDX 4.0'. SysEx `F0 43 0n 09 20 00`: raw DX7 bank NOT accepted over MIDI (dx_bank_load only in host tests). SysEx `F0 00 32 45 00 00 00 40 7F F7`: vendor update identify query (00 59 11 packed); update protocol kept. Identity: vendor identify FM-1_9XY; editor INFO 'sloopDX 4.0'.
Firmwares
The M-VAVE FM-1 runs 94 firmwares SynthHub maps, each with its own MIDI or another's it shares. All the devices with several: firmwares.
94 firmwares
Frequently asked questions
How many parameters of the M-VAVE FM-1 can be controlled over MIDI?
SynthHub's map of the M-VAVE FM-1 lists 16 MIDI CC parameters, each with its number, range and a readable name; the full chart is on this page.
Can an AI agent like Claude control the M-VAVE FM-1?
Yes: SynthHub's hosted MCP server knows the M-VAVE FM-1's MIDI map, and its browser relay lets the agent send it parameter changes or load a sound, each sound change confirmed by you.