devices/m-vave/fm-1.vendor.fw-vector37-0.3.2.json, updated 2026-10-24Edit on GitHubJSONCSVMIDNAMOSCQueryM-VAVE FM-1 running Vector37 0.3.2
The M-VAVE FM-1 MIDI implementation: 2 CC, 1 SysEx commands, each named, for Claude (MCP), SuperCollider or any OSC app.
- sourcemaker's documentation
- firmwarevector37-0.3.2
- Maker
- M-VAVE
- Firmware
- Vector37 0.3.2 (alternative firmware by genkigenki)
- Source
- maker's documentation
From the README of genkigenki/Vector37 at 08742a4, licence GPL-3.0.
Vector37
Watch it: Vector37 0.3 on YouTube · Try it: in your browser · Install: https://genkigenki.github.io/smk37/#fw-vector37
An orbiting overtone synth for the M-Vave SMK-37 (and, experimental, the FM-1). Four corners, each two overtone generators, a blend and a filter. A sun runs along a path, a moon circles it, and where the moon is decides how much of each corner you hear. One screen: the orbit, a small universe with a planet in each corner. The pads and the knobs are the planets (four pad groups of 2 x 2; eight knobs for the selected planet's sound: the planet draws them, and you hear it alone while you change it), the four faders are the path (family, size, speed, morph: they glide to where you move them). Thirty-two factory sounds in two banks (FACTORY, and FACTORY 2: the basics, pads, strings, choir, organ, keys, basses, sequences, brass, a lead, wind and drums, each a whole scene) and a USER bank of sixteen of yours, one a pad: PATCH opens the sound list (a pad: play; held 1 s: SAVE there; the sounds of the bank). Wavetables: each generator can read one of eight banks of 32 frames, and the moon moves its place as it nears the planet (SCALE: the WAVE knobs). The 3.5 mm MIDI jack sends the keys and wheels as played (TRS MIDI OUT; BT, the SETUP set: its channel, the USB MIDI IN channel, the pad light 25 .. 100 %, the sound at power-on). The knob sets (CHORD, FX, FADER BANK, ARP, SCALE, BT) open with a tap and stay open until tapped again. Unofficial firmware, not affiliated with or endorsed by M-Vave. Install at your own risk.
Control map · Design · On the FM-1
Install
-
Python: connect the SMK-37 by USB, then
python tools/fm1_install.py --yes vector37.fwsc
Installing clears another firmware's stored data on the keyboard (and the other way round). To go back to the stock firmware, install it the same way. Rescue: hold OCT - while switching on. The SMK-37 Elite and the MKE-P37 take vector37-elite.fwsc / vector37-mke.fwsc.
Try it in your browser
Play a virtual FM-1 with any of its community firmwares: M-VAVE FM-1.
Communities
Where M-VAVE FM-1 owners meet, share and help each other:
- M-VAVE forum, forum
Share and load its sounds
Plug the M-VAVE FM-1 into your computer, open shared presets in Chrome, Edge or Opera and press Connect my synth: SynthHub finds it, takes the sound it plays and names it. Sounds others shared for it load from their page the same way.
https://github.com/genkigenki/Vector37
MIDI controls
3 controls, from the source at Vector37 0.3.2 (alternative firmware by genkigenki)
Track
| Control | CC | Range | Name to send |
|---|---|---|---|
| Mod wheel moon speed | 1 | 0–127 | /fm1_vector37/mod_wheel_moon_speed |
| All notes off | 123 | trigger | /fm1_vector37/all_notes_off |
SysEx commands
| Command | Arguments | Name to send |
|---|---|---|
| System info | /fm1_vector37/system/info |
Performance MIDI
Notes, pitch bend and any CC are also available: /fm1_vector37/note/on <note> <velocity>, /fm1_vector37/cc/<number> <value>, /fm1_vector37/pitchbend <0-16383>, /fm1_vector37/program_change <n>.
Use it
Find the MIDI ports, then start the bridge with this driver:
osc-bridge detect # prints the ready-to-run line for what is plugged in
osc-bridge run --device m-vave/fm-1.vendor.fw-vector37-0.3.2 --out-port <N> --in-port <M>
Then send OSC to 127.0.0.1:7777, for example:
osc-bridge osc-send /fm1_vector37/mod_wheel_moon_speed 63
From Claude or any MCP client, the osc-bridge mcp server exposes this driver as fm1_vector37: ask “what can the M-VAVE FM-1 do?” and it reads this map with list_routes. See the MCP guide.
Limitations
Vector37 0.3.2 by genkigenki (GPL-3.0), a instrument firmware for the FM-1. made for the SMK-37; FM-1 build experimental (no store, no TRS); on FM-1 no MIDI out at all. Channels: USB MIDI IN: OMNI (default) or one channel (SETUP K2); FM-1 TRS jack not read. Pitch bend: 14-bit pitch bend (stands in for the SMK pitch wheel), range = BEND RANGE in the ARP set; no RPN. Aftertouch: none. Clock: none. MIDI out: FM-1: none (USB out kept quiet; TRS MIDI OUT only on the SMK-37: keys, bend, CC1). NRPN: none. SysEx `F0 pack7(00 59 cmd len24 body chk) F7`: M-UPGRADE vendor update protocol (installers, hub): cmd 0x11 handshake answers the package identity; F0 22 24 35 7F F7 starts the pulled update. SysEx `F0 22 24 35 7D F7`: soft key: reboot into the bootloader. SysEx `F0 7D 46 4C`: absent: no Felucca editor protocol, no INFO reply. SysEx `F0 43`: absent: no raw DX7 SysEx parser. Identity: FM-1 build: vendor identify FM-1_700 (tools/build.py:63); release FM-1_7XY needs one-digit X.Y (0.3.2 does not fit: package identity UNKNOWN), rescue FM-1_000; SMK build 'SMK-37 Pro_7XY'; version string 0.3.2 (vector37.c:9); USB product "Vector37" (usb.c:278).
Firmwares
The M-VAVE FM-1 runs 94 firmwares SynthHub maps, each with its own MIDI or another's it shares. All the devices with several: firmwares.
94 firmwares
Frequently asked questions
How many parameters of the M-VAVE FM-1 can be controlled over MIDI?
SynthHub's map of the M-VAVE FM-1 lists 2 MIDI CC parameters, each with its number, range and a readable name; the full chart is on this page.
Can an AI agent like Claude control the M-VAVE FM-1?
Yes: SynthHub's hosted MCP server knows the M-VAVE FM-1's MIDI map, and its browser relay lets the agent send it parameter changes or load a sound, each sound change confirmed by you.